基于动态模型的机场配电网潮流计算新方法

机场配电网因非常情况成为孤立电力系统后，配电系统的电压、潮流和频率等发生巨大变化，传统的潮流计算方法往往会出现收敛性差、计算结果与实际不相符的情况。提出的机场配电网动态潮流计算模型能有效解决此类问题，阐述了机场配电网动态潮流计算模型的构成原理、算法并给出相应算例。通过算例计算证明了动态潮流计算模型适用于计算机场配电网的潮流。     

基于动态窗口的灰色加权填充算法及应用?

为解决复杂系统中单属性缺失数据填充困难问题，提出了基于动态窗口的灰色加权填充算法。该算法通过建立双向灰色预测模型，并采用模型精度评价系数加权填充缺失数据，有效增强了算法的准确性；提出基于灰色模型评价系数反馈的动态伸缩窗口概念，寻找产生最优模型的训练数据序列，使算法具有良好的鲁棒性和适应性。实验结果表明，该方法在RMSE和MA两项指标上均优于传统的双向灰插值、灰插值、多项式插值等方法。     

驱动控制对太阳帆板驱动系统动力学特性的影响

准确预示太阳帆板驱动系统动力学特性是开展扰振机理和振动控制研究的基础。本文推导了考虑驱动控制因素的太阳帆板驱动装置等效力学特性参数表达式,构建了太阳帆板驱动系统动力学特性等效分析模型,并在仿真和试验验证基础上,讨论了驱动速度和控制增益对驱动装置力学特性参数和驱动系统动力学特性的影响规律。结果表明:所构建的等效分析模型能够在不同驱动速度和控制增益情况下准确预示驱动系统动力学特性,分析结果与试验误差小于10%；驱动装置等效阻尼与驱动速度和控制增益无关,但等效刚度随控制增益减小和驱动速度增大而减弱。随着驱动速度提高,驱动控制逐渐成为影响驱动系统动力学特性的重要因素。     

飞机液压系统试验数据分析软件的研究与开发

为了解决对飞机液压系统试验数据进行全程实时观测困难这一问题,避免重复试验,以VC++为开发工具,采用面向对象的设计方法,设计了一套飞机液压系统试验数据动态回放、分析软件.并应用某型号飞机前起落架收放系统的主液压泵的工作过程试验数据对该软件进行了测试,结果表明该软件能够为飞机液压系统的试验提供有用的帮助,具有较高的应用价值.     

Inventory policies for a make‐to‐order system with a perishable component and fixed ordering cost

We consider a make‐to‐order production system where two major components, one nonperishable (referred to as part 1) and one perishable (part 2), are needed to fulfill a customer order. In each period, replenishment decisions for both parts need to be made jointly before demand is realized and a fixed ordering cost is incurred for the nonperishable part. We show that a simple (s_n,S,S) policy is optimal. Under this policy, S along with the number of backorders at the beginning of a period if any and the availability of the nonperishable part (part 1) determines the optimal order quantity of the perishable part (part 2), while (s_n,S) guide when and how much of part 1 to order at each state. Numerical study demonstrates that the benefits of using the joint replenishment policy can be substantial, especially when the unit costs are high and/or the profit margin is low. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

基于模糊时间序列的时变动态系统模糊建模

要想建立结构不确定、参数时变的动态系统的模型是很困难的。改进了Song Chisson的模糊时间序列方法,并成功应用于时变动态系统的辨识与建模和自适应控制。仿真结果表明该方法计算量小,实时性好,能很快地跟踪系统的变化。     

中子增殖研究

导出了一个新的中子增殖公式,公式简明,计算量小.经与传统的增殖公式进行比较,后者由于未考虑缓发中子效应,只能用于定性分析.新导出的中子增殖公式较精确地描述了中子的增殖过程,可用于定量计算与分析.     

The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.     

多架无人机协同作战的路径规划

提出了一种协调多架无人机的编队同时到达目标的航路规划方法.首先根据敌方防御区域内雷达、导弹等威胁阵地的具体分布情况,采用划分Voronoi多边形的方法制定初始航路,然后通过叠加定长线段到初始航路上对初始航路进行离散化,最后采用动态链类比法调整航路并对航路进行光顺优化处理,使航路安全可飞.并用数字仿真技术对该方法进行了验证,结果表明该方法是可行的.     

联合作战的远程火力战法动态分析方法*

用定量动态分析方法开发远程火力战法是联合作战规划中必须解决的重要问题。借助仿真和博弈分析的混合方法,在对博弈效用函数计算的基础上,构建基于识别真目标、假目标以及火力命中目标概率的二人非零和(TPNZS)非合作博弈模型来开发远程火力战法动态分析方法,对两个典型的联合作战远程火力打击战法性能的初步动态分析表明:战场势态的动态变化直接影响定量规划最优战法的结果。